| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Power Source/Network | Section: Battery/Charging | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F1P000X |
| Title: POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: REMOVAL (2008 Sequoia) | ||
REMOVAL
1. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY
2. REMOVE LUGGAGE COMPARTMENT TRIM BOX
3. REMOVE ROPE HOOK ASSEMBLY
4. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY
5. REMOVE DECK BOARD REINFORCEMENT SUB-ASSEMBLY
6. REMOVE DECK BOARD BRACKET
7. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly RH
.
8. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)
(a) Remove the rear No. 2 seat assembly RH
.
9. REMOVE REAR SEAT CUSHION HINGE LOWER COVER RH
10. REMOVE REAR FLOOR STEP NO. 1 COVER
11. REMOVE REAR FLOOR STEP NO. 2 COVER
12. REMOVE REAR DOOR SCUFF PLATE RH
13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
14. REMOVE ROPE HOOK ASSEMBLY
15. REMOVE REAR FLOOR MAT SUPPORT PLATE
16. REMOVE QUARTER TRIM PANEL ASSEMBLY RH
17. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat)
18. REMOVE POWER OUTLET SOCKET ASSEMBLY
|
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claws and remove the power outlet socket assembly. |
19. REMOVE POWER OUTLET SOCKET COVER
|
(a) Disengage the 2 claws and remove the power outlet socket cover. |
|
|